The right extruded aluminum table saw fence can dramatically improve accuracy, repeatability, and safety in any woodworking shop. This guide highlights five top aluminum fences and related accessories, drawing from rugged construction, versatile compatibility, and precise alignment features. Each option is evaluated on extendability, setup speed, and how well it integrates with common saws and jigs. Below is a quick comparison to help you pick the best fit for your setup.
| Product | Length | Key Benefit | Best For |
|---|---|---|---|
| BOW XT XTENDER Fence | 36 in | Multiple T-slots, fast detach, compatibility with Delta UniFence | Portable saws and small benchtop setups |
| Fulton Aluminum Miter Fence with Flip Stop | 17 in left and 17 in right reading tapes | Built-in flip stop, 45-degree angled ends for re-piece accuracy | Precision miters and repeatable cuts |
| Woodpeckers Auxiliary Rip Fence | 36 in | Infeed/outfeed support with T-slot access | Job-site and portable machines |
| Peachtree Uni Style Fence | 43 in | UHMW sacrificial face for rabbet cuts and fixture add-ons | Delta Uni-style upgrades |
| Rockler Double T-Track Fence Cap | 36 in | Universal T-track compatibility for DIY fence extensions | Custom fence builds and upgrades |
BOW XT XTENDER 36” Fence
The XT XTENDER 36” Fence is designed to extend shorter table surfaces for better control during feed and alignment. It stands 5 inches tall and features three top T-slots for feed control accessories, along with milled clamp attach slots that permit multi-position setups. A dedicated slot accommodates the BOW Feed Supports accessory, plus a slot to connect with Delta UniFence and Harvey fences. This extruded aluminum fence is anodized for durability and includes dimensions suitable for portable jobsite saws, benchtop models, and bandsaws. The system works with XT Feed Supports to extend the tabletop surface, turning a compact fence into a wider infeed/outfeed platform for safer and more accurate cuts. Quick attachment and removal via T-track clamps add convenience for on-demand use, with compatibility that covers a broad range of saw fences. The XTENDER is especially useful when expanding work areas on smaller machines without sacrificing precision control.
Fulton Universal Aluminum Miter Gauge Fence
The Fulton Aluminum Miter Gauge Fence combines a robust fence with a 17-inch left-reading and 17-inch right-reading tape, providing precise measurement at both ends for repeatable miter cuts. The fence ends are cut at 45 degrees on both ends to minimize gaps at the blade, ensuring the workpiece stays close and supported during approach. A built-in flip stop locks into any location along the fence, enabling fast, repetitive length cuts with consistent results. The design facilitates secure mounting to standard miter gauges and is compatible with many saw configurations. Precision alignment and straightforward setup make this fence a strong option for centralized, accurate miter work in professional or shop environments.
Woodpeckers Auxiliary Rip Fence
The Woodpeckers Auxiliary Rip Fence offers a 36-inch extension with integrated T-track slots and 2 sliding clamping blocks, designed for quick setup and secure alignment on compact machines. The fence is sized for job-site table saws and is compatible with various bandsaws and router tables when used with standard track clamps. It provides a practical infeed or outfeed support, enabling better stock control and reduced kickback risk. The included clamping blocks and thickness measurements help operators achieve accurate, repeatable cuts, particularly in repetitive ripping tasks. Made in the USA, it is a solid choice for professionals needing a dependable, portable fence extension.
Fulton Precision Miter Gauge with Aluminum Miter Fence
The Fulton Precision Miter Gauge combines a high-strength aluminum miter fence with a 45-degree angled end design for maximum stock support during bevel and miter cuts. The aluminum head is 0.200 inches thick and features 13 positive stop holes, including a 90-degree hole and six additional positions on either side (22.5, 30, 45, 60, 67.5, and 90 degrees). The included steel miter bar measures 17 inches and has standard 3/4 by 3/8 inch dimensions with a 1/8 inch T-slot running along the bottom to accommodate various accessories. This setup supports precise, repeatable angle cuts and integrates with many miter gauge configurations.
Peachtree Uni Style Fence with Sacrificial UHMW Face
The Uni Style Fence upgrade for Delta Uni fences features a single extruded aluminum body designed for higher strength and extended service life. A front-facing UHMW sacrificial fence face is recessed to accept a 1/2 inch thick strip, enabling easy rabbet cuts and fixture additions without damaging the main blade. The fence design supports a wide range of jigs and fixtures, expanding capabilities for advanced woodworking tasks. The 43-inch length provides more working area, improving material support along long runs. This option is well-suited for shops using Delta Uni fences who want to add versatility with a durable, upgrade-focused fence.
Rockler Double T-Track Fence Cap
Rockler’s Double T-Track Fence Cap provides a universal 36-inch length extrusion designed to mount to any 3/4-inch-thick sub-fence. The parallel side-by-side T-track design supports 5/16-inch and 1/4-inch T-bolts, plus 1/4-inch hex bolts, enabling a flexible, customizable fence extension. This cap is ideal for DIY fence builders and workshop upgrades, letting users add stops, measuring tapes, or other fence accessories with secure mounting. The design works well for builders seeking a modular approach to fence enhancements on existing saw setups.
Buying Guide: Key Considerations for Choosing an Extruded Aluminum Fence
- Fence length and compatibility: Ensure the fence length matches your saw bed and that it can attach to your current fence system or stand independently without interfering with blade travel.
- Clamping and attachment options: Look for fences with versatile T-slot access, clamp slots, or quick-attach mechanisms that let you deploy accessories and fixtures rapidly.
- Material and durability: Aluminum fences with anodized or protective coatings resist corrosion and maintain straightness under heavy use, important for long-term accuracy.
- Extendability and modularity: Fences that support add-ons like feed supports, sacrificial faces, or flip stops offer greater flexibility for complex cuts and repetitive tasks.
- Indexing and repeatability: Miter gauges and flip stops with precise scale markings improve consistency across multiple workpieces, reducing measurement drift.
- Portability vs. rigidity: Portable fences are convenient on job sites, while fixed fences generally offer greater rigidity for high-precision shop work.
- Compatibility with accessories: Check whether the fence supports brands or accessories you already own (or plan to purchase), such as Delta UniFence, Harvey fences, or Rockler T-track systems.
- Installation time: Fast-install options reduce downtime between setups, which is valuable for projects with tight deadlines.
- Maintenance: Look for fences with simple maintenance needs, including easily replaceable parts like clamps and wear surfaces.
- Budget and value: Higher initial cost may be offset by longer life, easier setup, and improved cut quality over time. Consider total cost of ownership rather than sticker price alone.